DAB Divertron 650A Electronic Submersible Pump with factory fitted float


20 in stock


The factory fitted float on this unique pump will detect the level of the water preventing pump roaming and unnecessary pump restarts providing additional protection against dry running.


Perfect for pumping pre-filtered rainwater or for installation in a well or bore hole.

Only 160mm diameter.


DAB Divertron 650A Electronic Submersible Pump complete with factory fitted float for added dry run protection

Performance improvement and power consumption reduction. The updated Divertron complies with the upcoming MEI energy requirements. Efficient while simultaneously making it more resilient, easier to install and maintain.


An electronic multi-impeller submersible pump for pressurised water developed for irrigation, gardening, and reuse of rainwater in residential buildings. For automatic on and off switching, it combines a pressure switch, a flow sensor, and control electronics.


The pump can start and stop automatically in accordance with the needs of the system thanks to automatic operation, which also guards against dry running. It comes with an integrated start capacitor, a non-return valve, a 15 metre power cord with a connector, and is mounted in a compartment accessible without removing the pump.


It is recommended the installation of a small auxiliary expansion tank.




  • Maximum immersion depth: 12 m
  • Type of pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallized and chemically neutral
  • Liquid temperature range: from 0°C to +40°C
  • Maximum operation depth: 15 m
  • Flanges, thread: 1″ (supplied as standard with a four-section fitting-reducer)
  • Pump maximum diameter: 160 mm
  • Impeller/s material: technopolymer
  • Maximum number of starts: 20/h
  • Protection class: IP 68
  • Motor insulation class: F
  • Power cable (m) and plug: 15 m H07RNF with power plug
Product TypeSubmersible Drainage/Sump Pumps
Custom Shipping0.000000
BrandDAB Pumps
Warranty2 Year Warranty
DimensionsA = Ø 160 , B = 186, C = 33, H = 488, H1 = 469, H2 = 455, H3 = 548mm
Power Supply220V-240V Single Phase
Kw Rating0.42 kW
Max Flow5.8 m3/h
Max Head30.5m
Outlet Connection1” Threaded
40°C – max temperature

Optional Extras

Auxiliary tank, expansion vessel, mesh strainer filter

Included Components

  • DAB Divertron Submersible Pump
  • Multi-hose reducer
  • 15 metre H07RNF power cable with 2-pin (Schuko) plug
  • Built-in Non Return Valve (NRV) / Check Valve
  • Quick Installation Guide (note QR code on Quick Installation guide goes to the full Operation and Installation Instructions)
  • warranty &
  • ‘Original Instructions’ booklet ie health and safety guidance


This website uses cookies to ensure you get the best experience on our website. More Info